dmesg - 2013-01-22 01:29
Booting Linux on physical CPU 0
Linux version 3.6.0-rc5 (ruppi@ruppi-Virtualbox) (gcc version 4.7.1 (Ubuntu/Linaro 4.7.1-5ubuntu1~ppa1) ) #1 SMP PREEMPT Wed Sep 12 16:25:07 KST 2012
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: ODROID-X
cma: CMA: reserved 16 MiB at 6e800000
Memory policy: ECC disabled, Data cache writealloc
CPU EXYNOS4412 (id 0xe4412211)
exynos4_init_clocks: initializing clocks
S3C24XX Clocks, Copyright 2004 Simtec Electronics
s3c_register_clksrc: clock armclk has no registers set
s3c_register_clksrc: clock audiocdclk has no registers set
audiocdclk: no parent clock specified
exynos4_setup_clocks: registering clocks
exynos4_setup_clocks: xtal is 24000000
EXYNOS4: PLL settings, A=1000000000, M=800000000, E=96000000 V=108000000
EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=160000000
ACLK100=100000000, ACLK160=160000000, ACLK133=133333333
sclk_pwm: source is ext_xtal (0), rate is 24000000
sclk_csis: source is xusbxti (1), rate is 1500000
sclk_csis: source is xusbxti (1), rate is 1500000
sclk_cam0: source is xusbxti (1), rate is 1500000
sclk_cam1: source is xusbxti (1), rate is 1500000
sclk_fimc: source is xusbxti (1), rate is 1500000
sclk_fimc: source is xusbxti (1), rate is 1500000
sclk_fimc: source is xusbxti (1), rate is 1500000
sclk_fimc: source is xusbxti (1), rate is 1500000
sclk_fimd: source is mout_mpll_user (6), rate is 50000000
sclk_mfc: source is mout_mfc0 (0), rate is 50000000
On node 0 totalpages: 257792
Normal zone: 1520 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 188944 pages, LIFO batch:31
HighMem zone: 526 pages used for memmap
HighMem zone: 66802 pages, LIFO batch:15
PERCPU: Embedded 7 pages/cpu @c0d72000 s7744 r8192 d12736 u32768
pcpu-alloc: s7744 r8192 d12736 u32768 alloc=8*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 255746
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 48MB 216MB 743MB = 1007MB total
Memory: 988624k/1005008k available, 42544k reserved, 269312K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc04b1b24 (4775 kB)
.init : 0xc04b2000 - 0xc04dae40 ( 164 kB)
.data : 0xc04dc000 - 0xc052cd80 ( 324 kB)
.bss : 0xc052cda4 - 0xc0565a20 ( 228 kB)
SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:549
sched_clock: 32 bits at 200 Hz, resolution 5000000ns, wraps every 4294967291ms
Console: colour dummy device 80x30
console [tty1] enabled
Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
Setting up static identity map for 0x40377bd0 - 0x40377c28
L310 cache controller enabled
l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576 B
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
CPU1: Unknown IPI message 0x1
CPU2: Booted secondary processor
CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
CPU2: Unknown IPI message 0x1
CPU3: Booted secondary processor
CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
CPU3: Unknown IPI message 0x1
Brought up 4 CPUs
SMP: Total of 4 processors activated (7969.17 BogoMIPS).
devtmpfs: initialized
dummy:
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
S3C Power Management, Copyright 2004 Simtec Electronics
EXYNOS4x12 PMU Initialize
EXYNOS: Initializing architecture
bio: create slab at 0
hdmi_5v: 5000 mV
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
s3c-i2c s3c2440-i2c.0: slave address 0x10
s3c-i2c s3c2440-i2c.0: bus frequency set to 97 KHz
max77686 0-0009: device found
max77686 0-0009: irq is not specified
VDD_ALIVE_1.0V: 1000 mV
VDDQ_M1M2_1.8V: 1800 mV
VDDQ_M0_1.8V: 1800 mV
VDDQ_MMC2_2.8V: 2800 mV
VDDQ_MMC13_1V8: 1800 mV
VDD_MPLL_1.0V: 1000 mV
VDD_VPLL_1.0V: 1000 mV
VDD10_HDMI_1.0V: 1000 mV
VDD_VTCORE_1.0V: 1000 mV
VDDQ_MIPIHSI_1.8V: 1800 mV
VDD18_ABB1_1.8V: 1800 mV
VDD33_UOTG_3.3V: 3300 mV
VDDQ_C2C_1.8V: 1800 mV
VDD18_ABB2_1.8V: 1800 mV
VDD10_HSIC_1.0V: 1000 mV
VDD18_HSIC_1.8V: 1800 mV
VDDQ_CAM_1.8V: 1800 mV
VDD_LDO18_1.8V: 1800 mV
VDD_VTCAM_1.8V: 1800 mV
VDD_LDO20_1V8: 1800 mV
VDD_SDCARD_3.3V: 3300 mV
VDD_LDO22_2.8V: 2800 mV
VDD_TOUCH_2.8V: 2800 mV
VDD_TOUCHLED_3.3V: 3300 mV
VDDQ_LCD_1.8V: 1800 mV
VDD_MOTOR_3.0V: 3000 mV
VDD_MIF_1.0V: 800 1050 mV at 1000 mV
VDD_ARM_1.3V: 800 1350 mV at 1287 mV
VDD_INT_1.0V: 800 1150 mV at 1000 mV
VDD_G3D_1.0V: 850 1200 mV at 1000 mV
VDDQ_CKEM1M2_1.2V: 1200 mV
VDD_INL_1.35V: 1350 mV
VDD_INL_2.0V: 2000 mV
VDD_BUCK8_2.8V: 2800 mV
VDD_BUCK9_1.2V: 1200 mV
s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
s3c-i2c s3c2440-i2c.1: slave address 0x10
s3c-i2c s3c2440-i2c.1: bus frequency set to 97 KHz
s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
s3c-i2c s3c2440-i2c.3: slave address 0x10
s3c-i2c s3c2440-i2c.3: bus frequency set to 97 KHz
s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
s3c-i2c s3c2440-i2c.7: slave address 0x10
s3c-i2c s3c2440-i2c.7: bus frequency set to 97 KHz
s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
s3c-i2c s3c2440-hdmiphy-i2c: slave address 0x10
s3c-i2c s3c2440-hdmiphy-i2c: bus frequency set to 97 KHz
s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Version 1.0.25.
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource mct-frc
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 24576 bytes)
UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 11392K
bounce pool size: 64 pages
msgmni has been set to 1459
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
start plist test
end plist test
s3c-fb exynos4-fb.0: start latency exceeded, new value 791 ns
s3c-fb exynos4-fb.0: state restore latency exceeded, new value 34625 ns
Console: switching to colour frame buffer device 170x48
s3c-fb exynos4-fb.0: window 0: fb
dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056
dma-pl330 dma-pl330.2: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
exynos4210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 84) is a S3C6400/10
exynos4210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 85) is a S3C6400/10
console [ttySAC1] enabled
exynos4210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 86) is a S3C6400/10
exynos4210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 87) is a S3C6400/10
brd: module loaded
loop: module loaded
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
s5p-ehci s5p-ehci: S5P EHCI Host Controller
s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
s5p-ehci s5p-ehci: irq 102, io mem 0x12580000
s5p-ehci s5p-ehci: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: S5P EHCI Host Controller
usb usb1: Manufacturer: Linux 3.6.0-rc5 ehci_hcd
usb usb1: SerialNumber: s5p-ehci
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
exynos-ohci exynos-ohci: Already power on PHY
exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2
exynos-ohci exynos-ohci: irq 102, io mem 0x12590000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EXYNOS OHCI Host Controller
usb usb2: Manufacturer: Linux 3.6.0-rc5 ohci_hcd
usb usb2: SerialNumber: exynos-ohci
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
usb3503: USB HUB driver init
usb3503: usb3503_probe:375
usb3503: usb3503_set_mode: mode = 1
usb3503: usb3503_register_write: reg: e7 data: 3 write failed
usb3503: reg_write: write E7, req:03, val:00
usb3503: SP_ILOCK write fail err = -111
usb3503: usb3503_probe: probed on hub mode
i2c-core: driver [usb3503] using legacy suspend method
i2c-core: driver [usb3503] using legacy resume method
s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
s5p-hdmiphy 8-0038: probe successful
s5p-hdmi exynos4-hdmi: probe successful
Samsung TV Mixer driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
s5p-mixer s5p-mixer: probe start
s5p-mixer s5p-mixer: resources acquired
s5p-mixer s5p-mixer: added output 'S5P HDMI connector' from module 's5p-hdmi'
s5p-mixer s5p-mixer: module s5p-sdo is missing
s5p-mixer s5p-mixer: registered layer graph0 as /dev/video0
fb1: registered frame buffer emulation for /dev/video0
s5p-mixer s5p-mixer: registered layer graph1 as /dev/video1
fb2: registered frame buffer emulation for /dev/video1
s5p-mixer s5p-mixer: registered layer video0 as /dev/video2
fb3: registered frame buffer emulation for /dev/video2
s5p-mixer s5p-mixer: probe successful
cpuidle: using governor ladder
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
s3c-sdhci exynos4-sdhci.2: clock source 2: mmc_busclk.2 (50000000 Hz)
mmc0: no vmmc regulator found
Registered led device: mmc0::
mmc0: SDHCI controller on samsung-hsmmc [exynos4-sdhci.2] using ADMA
Registered led device: led1
Registered led device: led2
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
mmc0: new high speed SDHC card at address b500
mmcblk0: mmc0:b500 SU16G 14.8 GiB
max98090 1-0010: revision 0x42
mmcblk0: p1 p2 p3
usb 1-2: new high-speed USB device number 2 using s5p-ehci
[MAX98090] max98090_set_record_main_mic(150)
hkdk-snd-max89090 hkdk-snd-max89090: max98090-aif1 samsung-i2s.0 mapping ok
hkdk-snd-max89090 hkdk-snd-max89090: max98090-aif1 samsung-i2s.0 mapping ok
TCP: cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
NET: Registered protocol family 35
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
Registering SWP/SWPB emulation handler
VDD_G3D_1.0V: incomplete constraints, leaving on
VDDQ_LCD_1.8V: incomplete constraints, leaving on
s3c-rtc s3c64xx-rtc: setting system clock to 2013-01-21 08:41:30 UTC (1358757690)
ALSA device list:
#0: hkdk-max98090
Freeing init memory: 160K
usb 1-2: New USB device found, idVendor=0424, idProduct=3503
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
udevd[1212]: starting version 175
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 3 ports detected
EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
usb 1-2.1: new high-speed USB device number 3 using s5p-ehci
usb 1-2.1: New USB device found, idVendor=0424, idProduct=9514
usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-2.1:1.0: USB hub found
hub 1-2.1:1.0: 5 ports detected
usb 1-2.2: new low-speed USB device number 4 using s5p-ehci
usb 1-2.2: New USB device found, idVendor=0a81, idProduct=0101
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2: Product: USB Keyboard
usb 1-2.2: Manufacturer: CHESEN
input: CHESEN USB Keyboard as /devices/platform/s5p-ehci/usb1/1-2/1-2.2/1-2.2:1.0/input/input0
hid-generic 0003:0A81:0101.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-s5p-ehci-2.2/input0
input: CHESEN USB Keyboard as /devices/platform/s5p-ehci/usb1/1-2/1-2.2/1-2.2:1.1/input/input1
hid-generic 0003:0A81:0101.0002: input,hidraw1: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-s5p-ehci-2.2/input1
usb 1-2.3: new low-speed USB device number 5 using s5p-ehci
init: ureadahead main process (1365) terminated with status 5
usb 1-2.3: New USB device found, idVendor=1bcf, idProduct=0007
usb 1-2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-2.3: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/platform/s5p-ehci/usb1/1-2/1-2.3/1-2.3:1.0/input/input2
hid-generic 0003:1BCF:0007.0003: input,hidraw2: USB HID v1.10 Mouse [USB Optical Mouse] on usb-s5p-ehci-2.3/input0
usb 1-2.1.1: new high-speed USB device number 6 using s5p-ehci
usb 1-2.1.1: New USB device found, idVendor=0424, idProduct=ec00
usb 1-2.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
udevd[1417]: starting version 175
rtusb init rt2870 --->
usbcore: registered new interface driver rt2870
EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro
s5p-mixer s5p-mixer: start latency exceeded, new value 1208 ns
s5p-mixer s5p-mixer: state restore latency exceeded, new value 39042 ns
s5p-mixer s5p-mixer: stop latency exceeded, new value 833 ns
s5p-mixer s5p-mixer: state save latency exceeded, new value 9041 ns
input: gpio-keys as /devices/platform/gpio-keys.0/input/input3
mousedev: PS/2 mouse device common for all mice
smsc95xx v1.0.4
smsc95xx 1-2.1.1:1.0: eth0: register 'smsc95xx' at usb-s5p-ehci-2.1.1, smsc95xx USB 2.0 Ethernet, a6:20:ef:1e:82:c6
usbcore: registered new interface driver smsc95xx
max98090_set_playback_path [682] param 2
[MAX98090] max98090_set_playback_speaker_headset(111)
max98090_set_record_path [734] param 0
[MAX98090] max98090_set_record_main_mic(150)
init: gator-daemon main process (1760) terminated with status 1
init: failsafe main process (1747) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
[MAX98090] max98090_set_playback_speaker_headset(111)
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
max98090_set_playback_path [682] param 2
[MAX98090] max98090_set_playback_speaker_headset(111)
max98090_set_record_path [734] param 0
[MAX98090] max98090_set_record_main_mic(150)
init: hybrid-gfx main process (1890) terminated with status 1
init: tty1 main process (2005) killed by TERM signal
NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
s5p-mixer s5p-mixer: state restore latency exceeded, new value 43291 ns
s5p-mixer s5p-mixer: state save latency exceeded, new value 12625 ns
s5p-hdmi exynos4-hdmi: start latency exceeded, new value 792 ns
s5p-hdmiphy 8-0038: s_dv_preset(preset = 18)
s3c-i2c s3c2440-hdmiphy-i2c: timeout waiting for bus idle
plugged
s5p-hdmi exynos4-hdmi: state restore latency exceeded, new value 48021676 ns
s5p-hdmiphy 8-0038: s_stream(1)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
smsc95xx 1-2.1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
s3c-i2c s3c2440-hdmiphy-i2c: timeout waiting for bus idle
### max98090_dai1_hw_params###
max98090_get_playback_path [718] current playback path 2
max98090_get_record_path [759] current record path 0
### max98090_dai1_hw_params###
max98090_get_playback_path [718] current playback path 2
max98090_get_record_path [759] current record path 0
### max98090_dai1_hw_params###
max98090_get_playback_path [718] current playback path 2
max98090_get_record_path [759] current record path 0
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
max98090_get_playback_path [718] current playback path 2
max98090_get_record_path [759] current record path 0
### max98090_dai1_hw_params###
max98090_get_playback_path [718] current playback path 2
max98090_get_record_path [759] current record path 0
warning: process `colord' used the deprecated sysctl system call with 8.1.2.
init: origen-bluetooth pre-start process (1879) terminated with status 1
samsung-i2s samsung-i2s.0: i2s_set_sysclk:402 Other DAI busy
usb 1-2.1.4: new high-speed USB device number 7 using s5p-ehci
usb 1-2.1.4: New USB device found, idVendor=1e3d, idProduct=2096
usb 1-2.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2.1.4: Product: Flash Disk
usb 1-2.1.4: Manufacturer: Generic
usb 1-2.1.4: SerialNumber: CCBB0301042056143379303105
smsc95xx 1-2.1.1:1.0: eth0: link down
SCSI subsystem initialized
usbcore: registered new interface driver uas
Initializing USB Mass Storage driver...
scsi0 : usb-storage 1-2.1.4:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 0:0:0:0: Direct-Access Generic Flash Disk 5.00 PQ: 0 ANSI: 2
sd 0:0:0:0: [sda] 8220672 512-byte logical blocks: (4.20 GB/3.91 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08
sd 0:0:0:0: [sda] No Caching mode page present
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] No Caching mode page present
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 0:0:0:0: [sda] No Caching mode page present
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI removable disk
smsc95xx 1-2.1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
smsc95xx 1-2.1.1:1.0: eth0: link down
smsc95xx 1-2.1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
unplugged
plugged
unplugged
plugged
unplugged
plugged
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
### max98090_dai1_hw_params###
unplugged